Additionally, the driver will support Broadcom's , , and cards. The driver acts as cryptographic service provider to the Solaris Cryptographic Framework. The driver can be used by anyone who uses this framework. In this release, the glm driver has been ported to the x64 platform.
This driver enables you to use the xa card on the AMD64 platform. For further information, see the glm 7D man page. This driver supports the DLPI interface and checksum offload. At this point, press F9 on your keyboard, and insert the CD with the driver disk in it, or use one of the other methods such as installation over the network.
The installer will proceed to attempt to load the driver. If this is successful, you can continue with the installation as normal. Near the end of the installation, you will be prompted to re-insert the driver disk otherwise known as a XenServer supplemental pack so that the driver can be installed onto disk. You must re-supply the driver disk at this point. Failure to do so will mean that the installation will not contain the new drivers.
After this step, no further action is required. At the boot: prompt, type: shell You will now be presented with a command prompt. If error messages are presented, it is likely that other drivers depend on one or more of the drivers you are attempting to unload. If this is the case, please contact Citrix Technical Support. Use the procedure described above to provide the driver disk to the installer, which should now load correctly. Installing the Update by using the xe Command Line Interface Perform the following steps to install the update remotely using the xe CLI: Download the update to a known location on a computer that has XenCenter installed.
This ensures that the driver loads correctly. Was this page helpful? Both bit and bit PC Cards are now recognized by Solaris. For more information, see the pcic 7D pcic 7D and cardbus 4 man pages. The Xorg server for the X11 window system, the associated graphics, and the input device drivers, have been upgraded to the X11R7.
The X11R7. The use of the X tunneling and compression features of ssh 1 is suggested for sites that need X displays across extremely bandwidth-limited network links.
The nvidia-settings and nvidia-xconfig configuration tools for these drivers are also provided.
0コメント